vw golf tdi vw golf tdi volkswagen jetta tdi -- mmk4mkt

Brake Caliper Tool 110.00

T10165 Brake Caliper Tool
The old number for this tool was 3272
(discontinued)
T10165 is the correct current factory number for this tool.
Brand New Tool
Made in Germany.
Some Vehicles include: Beetle 1.8 Turbo
(see your manual for exact year model applications tool number T10165 or old number 3272 same as T10165)
Beetle 4 CYL , Beetle TDI Diesel , Corrado SLC V6 ,
Golf Cabrio IV GL , Golf Cabrio IV GLX , Golf III GL 4 CYL ,
Golf III GTI 4 CYL , Golf III GTI VR6 , Golf III TDI Diesel , Golf IV 4 CYL ,
Golf IV GL 4 CYL , Golf IV GLS 4 CYL, Golf IV GTI 1.8 Turbo ,
Golf IV GTI VR6 AFP , Golf IV TDI Diesel , Golf IV VR6 AFP ,
Jetta III GL 4 CYL , Jetta III GLS 4 CYL , Jetta III GLX VR6 ,
Jetta III TDI Diesel , Jetta IV 1.8 Turbo , Jetta IV GL 4 CYL ,
Jetta IV GLS 4 CYL , Jetta IV GLS VR6 AFP , Jetta IV GLX VR6 AFP,
Jetta IV TDI Diesel , Jetta Wagon 1.8 Turbo , Jetta Wagon 1.9 TDI ALH ,
Jetta Wagon 4 CYL AZG / AVH, Passat TDI Diesel ,
Passat V6 30V AHA / ATQ , PassatTurbo 20V AEB

Golf Guard Black 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
Picture is for reference only.
This is the Golf Guard in Black (color).
Also available in Pewter.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Golf Guard Pewter 96.99
Golf Guard Delux
. Large capacity: holds bags up to 11" in diameter and drivers up to 46" long . Key Lockable Latches with Protective Rib . Foam padded Interior to Protect Club Heads . Super Tough Wheels . 5 year warranty
This is Pewter color.
Also available in Black.
Dimensions 49.6" x 14.9" x 16.4"
read more:

Pin Wrench Socket 14.99

VW524Pin Wrench Socket with 1/2" drive.This tool is used for R&R of grooved ring retaining nuton strut tower of front shock absorber. Applicable: This popular tool is used on a wide variety of VW and Audi MK1 golf and GTi , MK2 Golf & GTi 8V and 16VPolos..Audi Coupe..Audi 80 & Audi 90
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Pin Wrench 37.00

Heavy Duty Tensioner with Handle Grip
Same as Volkswagen number T10020
VW AUDI TENSION PULLEY SPANNER WRENCH This unique tool is for 1998 and later VW and Audi which require spanner wrench adjustments to the timing belt.Details: Special Wrench for adjusting the belt tension on the following: Audi: A6 1.6 (96 and newer) ALZ VW: Polo Classic, Golf, Bora, New Beetle 1.6 (97 ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 ) AQY / APK

This is the new style Pin wrench with the (offset) angled head, same as the factory tool only this tool is a little longer for leverage with a rubber handle grip for a better feel compared to the smaller version.

Super Duty Pin Wrench 37.00

Pin Wrench Set 2 49.00

This is the Best Quality Set of the two CRUCIAL VW Audi Pin Wrenches you will find anywhere.
SUPER HIGH QUALITY TOOLS (BOTH) MADE IN GERMANY BY HAZET.
First item is number V159 (this is a smaller tool on the left side picture is not to scale) This tool is for easy adjustment of Camshaft spur belts
(toothed belt) on idler pulleys with Pin holes. This wrench with its protruding pins, grabs the center
of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment.
Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80
Distance of pins 18 mm, diameter of pins 2.9 mm for deep located idler pulley
on toothed belt on 1,6 l diesel engine VW van T3 (up to model 1991).
V159 is the correct number the old VW Number on this (smaller) tool was 2587.

T10020 Special wrench with an offset (angled) head (Larger tool on right side of image)
This tool also used for adjusting timing belt tension.
99 and later VW Golf, VW Jetta and Beetle with 2.0 Litre Gas and 1.9 Litre TDI Engines.1999 and newer Golf, Jetta
New Beetle with 2.0l gas engine and 1.9l T.D.I. Diesel engine. You will get both tools with this purchase.

Factory Oil Wrench 29.50

Item Number 3417 Original Oil service Wrench 74mm with14 Points (inside flats flutes).
Applications include: Audi, VW Golf, and new body Jetta, TDI (Diesel)
and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0litre,
Rabbit, Dasher, Scirocco, and New Beetle.
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Factory Tool 3417 29.50

Tappet Depressor Set 81.50

VW546 Tappet Depressor Tappet Depressor used for preloading cam followers. For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco, Passat up to 1982 Also Audi 80 , 100

Plus 2078A Tappet Depressor needed for preloading cam followers while exchanging valve adjusting shims. Applicable: Late model VW Audi 4 and 5 cylinder gas engines. More Detail: Some German Tool books have the following info on this tool... For all 4 cylinder engines with bucket tappets 1983 and Newer and all 5 and 6 Cylinder with bucket tappets Golf, Jetta, Scirocco, Passat, Audi 80, Audi 80 Coupe, Audi 80 Quatro, Audi 100, 200, LT28 50D.

SpecialOpen Socket 22mm 25.00

On Sale *
22mm Special TubeSocket
1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench)
2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606).
Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro.
This tool is often used in conjunction with a 7mm hex wrench.
Clickhere for a picture of the tools in action:

M44 Oil Service Wrench 29.50

Oil service Wrench 74mm with 14 Points (inside flats flutes).
Some applications include: Mercedes, Audi, VW Golf,
and new body Jetta, TDI (Diesel) and the following gas vehicles;
Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco,and New Beetle.
Mercedes M104, M110, M111, M119, M120 C, E
Porsche 944 and 924. 
Some Toyota (Filter 08922 0211 etc...)
Can also be used on BMW Top of housing 1.9L M44
Super High Quality Original Factory Tool Made in Germany!
Clickhere to see a detailed Application ChartMeasure filter diameter canister diameter or Check yourmanuals for details and size needed.

Hazet Oil Service Tool 29.50

Oil Filter Wrench M44 16.99

Oil service Wrench 74mm with 14 Points (inside flats flutes).
(Check your manuals for details and size needed. Measure filter diameter or canister diameter).
This is an excellent deal. This Socket has (2) bonus screws for more strength if needed. 
The srews are kept in the holes at the top when not in use and can be used inserted into the side holes making the tool more effective. Other applications include: Mercedes, Audi, VW Golf, and new body Jetta, TDI (Diesel) and the following gas vehicles; Passat, Golf and Jetta with 1.8 turbo and 2.0 litre, Rabbit, Dasher, Scirocco, and New Beetle. Mercedes M104, M110, M111, M119, M120 C, E Porsche 944 and 924. (will not work on 911) Some Toyota (Filter 08922 0211 etc...) Can also be used on BMW Top of housing 1.9L M44ClickHere for More Applications

22mm Strut O/2 Sensor Socket 18.99

On Sale 22mm Special Tube Socket 1.) Used for securing the Strut tower retaining nut of most European models (crucial when adjusting tension of front shocks). The 2/3 open side walls of this socket allows for easy access of an adjusting wrench. (normally 7mm Allen Hex Wrench) 2.) R&R of Oxygen Sensor.
Also for R&R of some Mercedes Diesel injectors ( OM604, 605 & 606). Details: For removing and installing front strut unit on VW Golf up to 1988, Jetta up to 87, Scirocco, Audi 80 and Golf 3 from 1993 newer, Passat from 88 and newer, Audi 100, 200 Coupe and Quatro. This tool is often used in conjunction with a 7mm hex wrench.Clickhere for a picture of the tools in action:

Special Open Socket 22mm 25.00

Oil Filter Wrench 74mm 16.99

Hazet Quality Tools 75.98

Driving Tool for Tensioning Device
special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991.

Tappett Depressor 41.50

VW546 Tappet DepressorTappet Depressor used for preloading cam followers.For Bucket Tappets on VW Golf,Jetta, Caddy, Scirocco, Passatup to 1982Also Audi 80 , 100

Flywheel Lock 34.99

VW558Volkswagen Flywheel Lock Factory tool Made in GermanyFlywheel and Pressure Plate Locking Pin. For VW Rabbit, GTI, Golf, Jetta and SciroccoMade in Germany

Timing Kit Master Set 1 254.00

Serious Master Set: Description (for upper 3 tools) Timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right. This is a popular set for Diesel timing of Bosch injection pumps. This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine.

BELOW IS THE DESCRIPTION ON THE LOWER 5 TOOLS. Five tools: vw 3032, 2066, 2065A, 2064 and 12717 (Pin Wrench) Details: 3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: VW / Audi diesels : 2066 Used for accurate adjustment of Bosch diesel injection pump. 2065A Diesel Camshaft Locking Plate Tool 2064 Lock Pin for Diesel. Pin Wrench 121717 Made in Germany for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of idler pulley and rotates around the off center retaining bolt allowing for belt tension adjustment (Tension Pulleys) 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80. You will get all 8 tools shown here.

Airbag Tool 15.50

USED FOR RELEASING AIR BAG MODULE ON 3 SPOKE LEATHER STEERING WHEEL IN PASSAT W8. ALSO 3 SPOKE STEERNG WHEEL IN GOLF AND JETTA WITH WOODEN SURROUND. MADE IN GERMANY

Cooling System Adapter 31.50

Cooling System Adapter for Golf Jetta and Corrado 1990 and older.

Hazet Tensioning Tool 75.98

Driving Tool for Tensioning Device
special steel, for operating devicewhen changing the V ribbed belt,especially on VW Polo, Golf and Passat, AUDI since 1991.

Shift Linkage Guage 13.99

3104Shift Linkage Adjustment GuageFor adjusting shift linkage onJetta and Golf with 5 speed gear box.
Applicable: 1985 and newer.

Torx Angle Driver 00

2117 T 40 Torx Offset Screwdriver with trinamic handle.
For the screws at the door fixing and locking devices,
for aligning doors, e.g.for VW Golf III, Polo, Vento, AUDI 100, OPEL Astra F, BMW E 34

Spark Plug Socket Remover 59.50

Spark Plug Socket Remover for INSTALLING and REMOVING normal or hot engines. Tool has a slotted cable for careful guidance of the cable..
For VR6, Golf, Passat, Corrado, Audi 80, 100, A4, A6 with 2.4 and 2.8I V6.

Clutch Cable Tool 26.00

NUMBER 3151Clutch Cable Fixture Volkswagen Factory Tool Made in GermanyUsed to position the self adjusting clutch cable at transmission during assembly(Self Adjusting Clutch) GOLF JETTA SCIROCCO 1985 and Newer

Injection Pump Wrench 29.98

4561 Hazet Single Box Wrench 13mm.
Chrome plated,for mounting and dismounting of injection pump,for adjustment of injection start resp.change of toothed belton 1.6 l 4 cyl. Diesel engine AUDI 80, Golf, Jetta,Caddy, Passat, Santana, CITROEN

Volkswagen Door Tool 9.99

T10011Volkswagen Door Tool triple Square 4
This is the correct tool for the job
New Beetle Tool This tool is used for R & R of door handle screws.Applicable: 1998 & newer VW Golf, Jetta, Passat & New Beetle....possibly other VW Audi.
This tool is a high quality item you will like.

Alternator Socket 27.00

For mounting the V belt pulley (slip clutch pulley) at the alternator (manuals call it a generator),
especially for T.D.I. VW Golf III, Vento, Passat and AUDI A 3
17MM outside dia. Length 30mm.
Also for Boxster. (See repair Group 27 (Porsche Bulletins) Boxster Alternators with free wheeling Pulleys. High Quality Tool
Made in Germany.
This 3400 is Hazet number 2592.

VW Audi Set Valve Tools 49.99

Two (2) Valve Adjusting Tools
Valve Shim Tool (10 208) Used for proper R&R of valve adjusting shims.
Applicable: Overhead Cam engines with adjusting shims
Plus
VW546 Tappet Depressor Tappet Depressor used for preloading cam followers.
For Bucket Tappets on VW Golf, Jetta, Caddy, Scirocco,
Passat up to 1982 Also Audi 80 , 100

Shock Tool Drive Nut 26.50

Shock Tool Drive Nut
See image with details above
Please notice this is item 2593 2(A)
Pin size 3.5mm with inner (span) size 10.5mm.
More data below on the tool.
Chassis Shock Absorber 2593 Hex Head Wrench
For front axle Golf II, III,
Jetta, Vento, Passat from model 88,
AUDI 80 from 87.
If you are notsure about your size please call or email first.
No return on this item unless defective.

COOLING TOOL 47.50

Expansion Tank Adapter Anodized AluminumTank Adaptor used for pressurizing the liquid cooling system. Applicable: VW Corrado, Quantum, Jetta 1990 and newer, Golf 1990 newer,Eurovan 1993 up, Passat with VR/6 1993 and newer.
Check out the (Adobe)
Cooling Adapter Application Charts Here

13 X 15mm Distributor Wrench 9.50

OFFSET DISTRIBUTOR CLAMP WRENCH 13 & 15mm. Use tool by itself or turn with 3/8" Dr. ratchet. Drop forged steel construction. Chrome plated to resist corrosion.13mm Applications: 1981 & later Ford V6 (3.8L) engines, 1984 1988 Ford Tempo & Topaz 2.3L HSC vehicles, 1986 & later GM Blazers with V6 (2.8L) engines. 15mm Applications: GM "X" body cars with V6 (2.8L) engines. 1982 & later Cadillac V8 (4.1L) engines, GM V6 (2.8L) engines, and 1985 VW Golf.

V159 Pin Wrench 19.50
TDI 1.9 Pin Wrench.
This is the Best Quality V159 you will find anywhere. Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
eg; Double Pin Wrench special steel, burnished,for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).
read more:

Spreader Socket 26.99
Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.
read more:

Chain Adjuster 24.50

3366CHAIN ADJUSTER Required to change the troublesome cam adjuster seal
Audi and Volkswagen 4, 6 (2.7 and 2.8) and 8 CylWith 5 Valve per Cyl.
Also Audi VW 1.8 Golf Jetta Passat New Beetle
Note:The manual says to remove both camshafts to change the seal ...
but using this tool you can relieve the tension on the camshaft chainand lift it up far enough to clean, remove and replace the gasket and seal.
This procedure not only saves time but saves any other damagethat may happen to camshafts and bearings by removing them.
ORIGINAL MATRA FACTORY TOOL MADE IN GERMANY

2 Piece Socket Set 32.99

22mm Special Tube Socket 4491A Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Spark Plug Boot Tool 32.99
Spark Plug Boot Tool
Due to restricted space the T10029 will install the spark plug boot properly.
VW and Audi spark plug boots designed to seal and increase contact between the spark plug and spark plug wire.
With the increased seal and location of the boot,
this tool has been made to access and remove the spark plug boot.
Tool is approximately 10 inches (250mm) long.
Used to pull off the spark plug socket...SOME APPLICATIONS INCLUDE: 2.8 2.9L VR6 engines
VW Golf, Corrado and Passat.Also Audi 80, 100, A4, A6 with 2.6 and 2.8L V6 engines.
This is the correct tool for the job.You will most likely find OLD number 3277 or 3277A in your manuals but
T10029 is the CORRECT current Volkswagen Audi Tool number. 3277 is and old number and Volkswagen calls this a SPARK PLUG CONNECTOR TOOL.
read more:

21mm Strut Set Up 75.00

21mm Special Tube Socket Plus Pin Wrench VW524
Used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

Switch Blade Radio Keys 37.50
O.E. ANTI THEFT RADIO KEY SWITCH BLADE
Radio Removal Kit Features:Special features:. Each key folds into the body handle like a pocket knife.. Each half of the tool kit allows for an even pulling action.. The two halves slide and are held together via an interlocking channel.. Every Key in the kit is current up to 2005.The full application range of this new kit is as follows:. Updated application key kit for Mercedes & all Porsche 996 and Boxster equipped withBecker radios.. Updated key combo for all Audi & VW radios up to 2004: models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.. Special Allen key for BMW E38 and E 39 models.. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

ANTI THEFT RADIO KEY SET 35.99
"NEW"
O.E. ANTI THEFT
RADIO KEY SWITCH BLADE STYLE
Radio Removal Kit Features:
Special features:. Each key folds into the body
handle like a pocket knife.
. Each half of the tool kit allows for an even pulling action.
. The two halves slide and are held together
via an interlocking channel.
. Every Key in the kit is current up to 2005.
The full application range of this new kit is as follows:
. Updated application key kit for Mercedes & all Porsche 996
and Boxster equipped withBecker radios.
. Updated key combo for all Audi & VW radios up to 2004:
models equipped with fourhorizontal (Audi) or two vertical slots (New Beetle, Jetta, etc.).
. VW only key kit for Passat, Jetta, Golf models. This key application range ends wherekey kit 2 begins.
. Five sided "pentagon" driver for most every BMW model, excluding E38 & E39 models.
. Special Allen key for BMW E38 and E 39 models.
. Standard "barbed hooks" (like U Hooks) for Ford, Chevy, Saab, Land Rover, etc.
read more:

Big Mak 126.00
Master Kit
Set of 6 Tools
Including Dial Indicator

Set Includes:
3032 Injection Pump Tool Puller used for the proper extraction of injection pump drive gear. Applicable: Volvo and VW / Audi diesels Excluding TDI
PLUS: VA6015 Holder used for accurate adjustment of Bosch diesel injection pump.
Plus: 2065A Diesel Camshaft Locking Plate Tool
PLUS: 2064 Lock Pin for Diesel.
Plus the Pin Wrench (made in Germany) for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
Plus Dial Indicator
read more:

T.D.I. Timing Kit 3 Tools 115.50

T.D.I. and New Beetle Cam Kit for correct and trouble free installations. Three crucial tools for changing timing belt on engine ALH. Chassis 1999 1/2 thru 2003 Golf Jetta (A4) MKIV and New Beetle TDI thru 2003.Reference numbers for the three tools are 3418 (Left side of image above) 3359 (Pin Center) and T10020 (Wrench Right)
This is a popular set for Diesel timing of Bosch injection pumps.This set has been developed for aligning the cam shaft with the Diesel pumpon 1998 and newer VW models equipped with a T.D.I. engine. Lock plate and alignment pin allows the technician for factory correctand trouble free installations.

3 Piece Strut Set 34.99

On Sale! 22mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

21mm Strut Set (3) 79.00

21mm Tube Socket Plus Pin Wrench number VW524, Plus 7mm Allen Wrench
Tools used for securing the Strut tower retaining nut of most European models
(crucial when adjusting tension of front shocks). The 2/3 open side walls of
this socket allows for easy access of an adjusting wrench.
(normally 7mm Allen Hex Wrench)
Also for R&R of Oxygen Sensor.

VW524 Pin Wrench Socket with 1/2" drive. This tool is used for R&R of
grooved ring retaining nut on strut tower of front shock absorber.
Also used for adjusting power steering gear on VW Jetta, Golf, GTI.

3 total pieces in this set: 2 Sockets and 7mm Allen Wrench.
The Allen wrench is 7.5 inches long.

Spreader Socket 18.99

Spreader Socket Number 3424This tool is used on all A4 platform VWs including Golf,Jetta, and Gti, 337, 20a.e. GTI model year 1999 to presentTool is used any time the strut needs to be separated from the wheel bearing housingMost common would be changing/replacing struts, coil spring, or the entire strut assemblyYou would also use this tool when servicing the wheel bearingWhy do you need to use it?? you can not easily remove the strut from the wheel bearing housing without itThe wheel bearing housing clamps down very tightly on the strut assembly....even with the bolt removed the housing is still firmly clamped to the strut...this tool allows you to spread the housing where it is clamped on so that the strut can be removed.Basically this tool is a must have any time the strut or wheel bearing housingneeds to be removed from the above models.

V159 Hazet Quality Tools 23.00

This is the Best Quality V159 you will find anywhere. Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
eg; Double Pin Wrench special steel, burnished,for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).

Hazet Quality Tools 23.00

Same as Volkswagen V159. This is the original Factory Tool.
This is also the best Quality V159 you will find anywhere.
Pin Wrench for easy adjustment of Camshaft spur belts (toothed belt) on idler Pulleys with Pin holes. This wrench with its protruding pins, grabs the center of the idler pulley and rotates around the off center retaining bolt allowing for easy belt tension adjustment. Tension Pulleys on 4 cylinder Golf, Jetta, Passat and Corrado. Audi 80.
eg; Double Pin Wrench special steel, burnished,for idler pulley on toothed belt, distance of pins 18 mm,diameter of pins 2.9 mm for deep located idler pulley on toothed belt on1,6 l diesel engine VW van T3 (up to model 1991).

You Searched for

vw golf tdi

Trade Links With ZDMAK